CE 250/S1

For Hot Stamping and Overprinting of Labels in Reels

CE 250/S1

THE MACHINE IS SUPPLIED AS FOLLOWS:-

Bench stand with integral electrical panels and electronic control system.
Stainless steel suction table for braking of incoming material.
High sensitivity photocell for correctly registered overprinting of pre-printed material for additional text, numbering, application of holograms or embossed designs.
230 x 230 mm hot stamping unit with max. 260 mm paper feed width.
Frontally removable printing plate cassette with registration by means of rotation and axial displacement of plate with adjuster knob. These procedures can be performed from the front of the machine with the maximum ease.
Print station driven by brushless motor with variable working speed during the cycle, allowing full management of speed and pressure contact time for each print cycle.
Substrate feed unit driven by stepped motor with large diameter cylinder and four pressure rollers controlled in pairs by pneumatic pistons.

TECHNICAL DATA

MAX. LABEL SIZE 250 X 250 mm

MAX. PRINT AREA 230 x 230 mm

MAX. WEB FEED WIDTH 260 mm

OUTPUT From 0 to 8,000 cycles/hour

POWER SUPPLY 380 V three-phase - 50/60 Hz

MACHINE DIMENSIONS 1820 mm x 1050 mm x (h) 1550 mm

MACHINE WEIGHT 800 kg

If you have come to this page through a search engine and wish to view our entire website, please click HERE

©ATLAS LABELLING SYSTEMS 2003, CAVENDISH CENTRE, BRASSEY STREET, BIRKENHEAD, MERSEYSIDE CH41 8BY
TELEPHONE: 0151 652 7712 / FAX: 0151 653 5594 / EMAIL: sales@als-online.co.uk

MAX. LABEL SIZE	250 X 250 mm
MAX. PRINT AREA	230 x 230 mm
MAX. WEB FEED WIDTH	260 mm
OUTPUT	From 0 to 8,000 cycles/hour
POWER SUPPLY	380 V three-phase - 50/60 Hz
MACHINE DIMENSIONS	1820 mm x 1050 mm x (h) 1550 mm
MACHINE WEIGHT	800 kg